Push kill switch in to stop motor, wouldn’t cut off,replaced with new kill switch,still won’t cut off. Trace the wires back best i could and what looks like the ground is good and other wire goes into a bundle or several small wires,any ideas on what to do next? Thank you!
Better break out the old Simpson 260.I would check the old switch for continuity first to see if you replaced a good switch.Then ring out the rest of the wiring.Probably could find a diagram on the internet.Good luck finding it .You could just run a new wire to ground out your fire to the block.
Not switch,took a working one of another motor to check-thanks anyhow
You can’t catch fish on a dry line