Hey everyone,
Just finished up exams and I am back in town for the summer. I will be working on boats for at least the first half of the summer, and then I will likely have to volunteer at a law firm second half to boost the resume. If anyone is interested in having their boat detailed, let me know and we will set up a day. I do my pricing based on the size, type, and location of the boat. Just for a rough estimate, it typically comes out to be around $8 per ft for boats under 18 ft, about $9 for boats 18-20 ft, and around $10 per foot for boats 21+. Flats boats and bay boats will usually be on the lower side, while walk-arounds are on the higher side.
For those of you I havent worked for, I clean everything on the boat, get rid of water stains on the hull, get rid of mildew, most rust stains and other stains that are difficult to take off, polish aluminum and metal, and wax both inside and outside. I will travel to wherever your boat is located and can take care of everything as long as a hose is nearby. I do a lot of work in Columbia as well if anyone in that area is interested.
The easiest way to get in touch will be email because I am away from my phone a lot. If you are interested, send me the type of boat and location and I can give you a price. I am booked for most of this week and a little bit of next week, but we will work out a day. I do a lot of offshore fishing as well, so let me know if you are interested in trading work for offshore trips.
Thanks,
Bobby Streisel
streiset@email.sc.edu
843-830-1978