Had to run the pex about 1100 feet from my well pump.Used 3/4 pex all the way.I have water but not enough pressure to force water out of the yammy block plug.Any way to boost the pressure?
Install an inline on-demand booster pump.
Also consider a hose bib filter. Mine cost about 7$ but it catches a whole lot of funk that you dont want running through your engine flush. It is also self cleaning.
kms
Try reducing the line to 1/2" Thats whats usually used. Also check to see what your well pressure switch is set at.
Changing line size does not do a thing for pressure…pressure is constant whether it is 1/2" or 12"…it will increase velocity, however.
P=F / A
P=pressure
F=force
A=area
With constant pressure, which you have, if you decrease Area, then velocity must increase.
Loosewire’s got the ticket.
Will try extra pump first.Thanks
Stonoman