No need to have the down time.
Have your injectors cleaned locally.
We will flow test, leak test, reverse flush, ultrasonically clean your injectors and replace the filters as needed.
We can bring your injectors to like new condition for a fraction of the cost of new ones.
keep your motor running at its best for less.
843-303-0240
What kind of injectors can you do? Do you have capabilities to do Dfi injectors? Also, doyou have a shop or repair facility here locally? When I googled the number it shows as a construction and a A/C duct cleaning service.
Hydra-Sports 22 Bay Sport
225 Rude
I repair windshields in Atlanta. Can I advertise here for free like you are doing? Pay the owner!!!
I just got my injectors cleaned and returned the next day. The boat is running great. As for the advertisement. I think if we were on a car website your windshield business would be welcomed, but since were on a boating website I think motor injector cleaning should be advertised here.
Since an injector is designed to “pop” off in one direction. How do you reverse flush an injector?
The Ultrasonic cleaning might be good if you have a terribly carboned up tip, but if you are reverse flushing then you would have to completely dissemble the injector.
< Evil is simply the absence of God >
quote:
Originally posted by Fred67Since an injector is designed to “pop” off in one direction. How do you reverse flush an injector?
The Ultrasonic cleaning might be good if you have a terribly carboned up tip, but if you are reverse flushing then you would have to completely dissemble the injector.
< Evil is simply the absence of God >
I’d like to know that too, considering an injector merely has a soleniod on top of it to open it are you trying to “back flush” it through the return? many rails are in series rather than parallel, you’ll push crap into other injectors?
I’ve seen some damage done by doing that on big trucks…
BG has a machine and product to flush injectors and pumps that works like a dream, but it’s all forward and self containing so you don’t contaminate… after their presentation and our shop using the system free long enough to run the numbers before we bit, it even gave such better fuel milage that we bought the whole system
http://www.bgprod.com/products/fuelair.html
as far as windshields, I have one on my center console… advertise away!! lol
I agree, this isn’t the place for free adds…
I’m also a tech, have been for over 30 years… we just purchased the BG system for our shop, only after it proved itself… not a sales pitch cause I don’t even remember the dudes names that presented it, it’s just a fact that it actually works
visited your site, so you’re removing the injectors and putting them in your little jig?
Sea Hunt Triton 177
115 Yamaha
do you replace the screens when you clean them?
You need to post your advertising under “services”…this is the “inshore discussion” blog…
fishinmyot
200 Bay Scout
115 Yamaha 4 strk
Yes we do replace the filter baskets, the baskets are removed before cleaning and reverse flushing. Most fuel injectors are a plunger type solenoid. They do not act as a check valve. Years ago some of them had check valves. Once the solenoid is energized fluid can run from either direction. Yamaha and Bosch both approve cleaning. And as for the bg system, the ones that I see on the link are on vehicle cleaners. They may work satisfactory but can you see inside of the intake and the combustion chamber to know the flow or pray patterns? With off vehicle cleaning you can measure precisely what each injector sprays, and view the spray patterns. Each injector is design for different applications. Spray patterns are designed to allow the fuel to atomize correctly.
I clean injectors for for several of the top boat dealerships in Charleston as well as a local performance motorcycle shop who has been factory sponsored multiple times and build high priced, high horsepower, motors with high compression. I doubt that any of them would take a chance on $10k and up motors if it had a chance of failing. I doubt any of them would take that chance to save a couple hundred bucks. Considering that an f115 injector cost 175 or so dollars and I can bring them to perform like new for 30 or so dollars.
www.dyflo.com
ultrasonic fuel injector and flow testing services