I have a 130 honda on an 18 whaler that never pees. It still runs fine when its not but it doesnt make me feel good. Do any of yall have this problem or know a possible cause and solution for it?
Thanks
Not familiar with Honda o/b’s.
Bugs like to crawl in the small outlets
Hose may be pinched.
Fitting on the motor may be obstructed.
Not getting a good flush after being in salt water several times can leave deposits inside.
Trace it back and try some wire to clear it. Careful not to force the wire thru the hose @ a turn.
Ask a Honda tech. about using compressed air.
I have a bf90. The little pee jet nozzle is tiny. I specifically keep about an 18" piece of Malin hard wire in the console just to poke it out. You will find that a single tiny grain of sand can clog that hole. It is unnerving and I want to make sure the water pump is working before I go anywhere, that’s why I keep the wire handy now.
“If you had to tell someone how good you are, then you probably aren’t that good”
02 Carolina Skiff 175 Hondinosaur 90 - “Gone Fission”
Thanks i flush it several minutes after every use and ive tried the wire but it still seems to clog
often they get a little corrosion at the fitting on the block