The 6 year old Hydro Turf I installed on the old jon boat has run its course. Going to replace the front deck (plywood) so eliminated 3/4 of removal, but the turf mounted to the aluminum had 3m backing and is hell getting up. Slow going the Johnny Cash method.
Any suggestions? Going back with marine vinyl, so everything covered will be recovered.
Thanks
Outdoor Carpet remover maybe. Might want to read the label and make sure it isn’t caustic on aluminum.
“Wailord”
1979 17’ Montauk
90 Johnson
Wilderness Ride 115
Not a sure thing, but might be worth trying…
I used to be into old rotary engine cars, and owned a few old first gen RX7’s. They had about 100 pounds of sound deadening material rolled onto the body of the car under the carpet. It was nasty sticky stuff that was impossible to remove.
DRY ICE made it peel right up! It was a pain to work with, but it worked amazingly well.
Good luck.
EDIT: You can buy dry ice at Publix. It’s in a freezer by the front door.
Wadmalaw native
16’ Bentz-Craft Flats Boat
Debond, will probably get it up. I have used it to remove 5200 with ease.
http://www.debondcorporation.com/products/marine-formula
SeaPro 220CC
Dixie Craft-custom flats boat
Debond, will probably get it up. I have used it to remove 5200 with ease.
http://www.debondcorporation.com/products/marine-formula
SeaPro 220CC
Dixie Craft-custom flats boat