Phin's garage sale- trolling rods, price drops

Discount on multiple items is worth it to me to get rid of stuff rather than haggling on each and every thing. Have tried to price stuff pretty good to begin with to save everybody time here.

I will update when stuff is sold or pending sale to somebody else.

Lots of stuff, so I will put a little up each day and note here when I am done.

Thanks

Table 1
reserved for trolling gear

Shimano TLD25’s
SOLD

Eight Graphite/E-glass hybrid trolling rods
5’9" 50-100# class
black guides. roller stripper and tip large enough for wind ons.
black/dark gray carbon-fiber-look blank w/ blue and champagne wrap and trim
Alum seats and gimbals
very light weight and great for 30’s or 50’s standup trolling in center consoles
West Marine “limited edition island style rods”
2 used one trip- 9.99999999 out of 10 condition
6 never used- 10+ condition (rods treated with protectant!)

$850 for all eight
or
$100 each
</font id=“blue”>

penn internationals 50TW’s
SOLD</font id=“red”>
trolling package 1: various 1-1.5oz sea witches & lehi squitch
SOLD</font id=“red”>
trolling package 2: various bird chains & green machines (4 total chains)
SOLD</font id=“red”>
trolling package 3: various blues
SOLD</font id=“red”>
trolling package 4: various reds
SOLD</font id=“red”>
trolling package 5: various brights
SOLD</font id=“red”>

trolling package 6: new red/blacks. Two rigged with 150lb and 9/0 7766 & chin weights.
$20

trolli

Table2
reserved for bottom gear

Penn 345GTi levelwind w/ Dolphin-Wisenhunt electric motor
SOLD</font id=“red”>
Penn 116L (12/0) Senator w/ 920XP Electramate and 130 class Pinnacle two-piece bent butt rod. Brand new with 1000+ yds of 130lb braid.
SOLD</font id=“red”>
Penn 115L (9/0) Senator w/ daiwa boat rod- good condition- only needs a little cleaning up. Rod is a 6’6" diawa 20-60# and needs new eye on tip.
SOLD</font id=“red”>
Penn 114HL (6/0) Senator- good condition
SOLD</font id=“red”>
Penn jigmaster used okay condition
SOLD</font id=“red”>
Penn 114L 6/0 okay condition- needs cleaning up
SOLD</font id=“red”>
Penn 114L 6/0 missing handle- okay condition- needs cleaning up
SOLD</font id=“red”>

Penn long beach model 68chrome spool- very good condition
$60

Penn 309 levelwind on rod
SOLD
Penn 320GTi levelwind on graphite rod
SOLD
swivels and snap swivels
SOLD</font id=“red”>

reserved for inshore tackle

fishing line-
SOLD</font id=“red”>

Okuma Alumina and 7ft spinning rod
SOLD</font id=“red”>

pins minnow brand new
$2

small circle hooks w/ wide gap. great for sheepshead
SOLD</font id=“red”>

crappie rigs
$7 for all

flounder rigs
SOLD</font id=“red”>

kingfishing

Penn Fathom Master 625 manual downriggers 48" boom (two of these in lightly used condition)
SOLD</font id=“red”>
king rigs. 1/0 single with treble trailers
SOLD</font id=“red”>
jig skirts, two per pack. They fit over the swivels on the above rigs, however, so you can easily change out colors on live baits for kingfish.
SOLD</font id=“red”>
various stainless wire. opened packs, but still a good bit of wire here. coffee color.
SOLD</font id=“red”>
Surflon nylon coated stainless wire
SOLD</font id=“red”>

pet spoons. brand new
$6 each- either size

Bomber 7" jawbreakers. brand new
$7 each

reserved for tackle organization

rod racks
organizers
blah blah etc etc

lindy rigger
sale pending</font id=“red”>

big peg board island on casters $190

reserved for tools

Ryobi palm sander. Takes 1/4 sheets. Barely used w/ soft case.
SOLD</font id=“red”>

gas pressure washer. harbor freight store brand. brand new never used
SOLD</font id=“red”>

Two push lawn mowers. Frames and motors good. have not used either in over 5yrs- ran good when “parked” in storage
$50 each

DeWalt 9.6V cordless drill kit- case, drill, two batts- barely used
SOLD</font id=“red”>

Ryobi 10" table saw mounted on rolling base. Used, but works good.
$95

reserved for marine electronics

GPS units
stereo stuff
etc

Furuno 1650D GPS display w/ power cord & NC/upper SC chart card
$295

two Furuno NavNet GPS/sonar/radar/etc machines w/ power cords only I believe they are GP1900C-NT models.
$995 each

Reserved for boat parts

GEMLUX plumbing- BRAND NEW

Deck drains. 1 1/2" with strainer caps (4 total)
$20 each (one left)

1 1/2" threaded drain thru hulls- extra long (2 total)
SOLD</font id=“red”>

1" threaded drain thru hull (1 total)
$15

FX-11 Fortress anchor. Used. 9 out of 10 condition.
$115

Seastar hydraulic tilt helm pump.
SOLD</font id=“red”>

analog tachometers$5 takes them all.

65 gallon plastic marine fuel tank.
white crosslinked polyethylene, below deck style, used
57x26x12"
$100

Rule tournament bilge pumps- used

1500GPH $25 with switch

2000GPH SOLD</font id=“red”>

Rule livewell pump- used
500GPH $15

Any Daiwa AG1605XB Graphite Long Cast reels? Older Berkley graphite IM6 rods? I’m interested to see what you have for GPS as well.

“Nanny Goat” 1980 Malibu 14’, 25 Merc

Looking for a 8-10’ Jon

Sent you a pm earlier today

Sails Pitch
196 CC Sea Pro
150HP Yamaha
“Get Hooked On The Sails Pitch”
[img=left]http://i106.photobucket.com/albums/m257/TripleTail/Picture4.gif[/img=left]

Hey, save me the GPS and stereo stuff…I need it for the partytoon!

I’d be interested in inshore terminal tackle, and rods and reels. If you could email or PM me with what you have that be great

I’m a high class redneck.

Fishing is a delusion entirely surrounded by liars in pfgs and buffs.

tld 15’s?

www.advoutdoors.com
“I have tomorrow open!”

Hey, was wondering if you had any fishing pliers for sale in your mix of goodies? I was looking at the Pescador 6 series, I’m looking for pliers that have the braid/line cutter incorporated in it.

Thank you

GPS units:
have a couple furuno navnet gps/sonar/radar displays and a furuno 1650df. No antennas. Displays and power cords only. All work.

pliers:
have a couple that may be like what you’re looking for but unsure if any of them are new or like new- will set them aside for you when I find them in case they’re what you want.

don’t have:
any IM6 graphite rods, daiwas or TLD’s

Have a penn 320gti and 309 levelwinds tho, Fritz.


www.scmarine.org

www.joinrfa.com

Luke 8:22-25

I’ve got about 10 320’s on various types of rods I will be unloading very soon. Thanks, Though

www.advoutdoors.com
“I have tomorrow open!”

What kind of inshore lures or terminal tackle rods/reels so you have?

I’m a high class redneck.

Fishing is a delusion entirely surrounded by liars in pfgs and buffs.

gotta go through and list everything yakman. have a couple boxes full of stuff, and I know some of it’s inshore.

anything in particular you need?


www.scmarine.org

www.joinrfa.com

Luke 8:22-25

quote:
Originally posted by Phin

Table2
reserved for bottom gear

jigs
conventional penn reels
electric reels
rods
lures
hooks
other terminal tackle

Penn 345GTi levelwind w/ Dolphin-Wisenhunt electric motor. Motor still allows for manual operation of reel via handle if needed.
With straight guide Penn rod and some 80lb braid backing on reel
$495

Penn 116L (12/0) Senator w/ 920XP Electramate and 130 class Pinnacle two-piece bent butt rod. Brand new with 1000+ yds of 130lb braid.
$1050

Penn 114HL (6/0) Senator
$100

Penn 114L 6/0
$40

Penn 114L 6/0 missing handle
$30</font id=“size4”></font id=“red”>

Penn 309 levelwind on rod
$75

Penn 320GTi levelwind on graphite rod
$85

Penn long beach model 68chrome spool- very good condition
$60


I’ll take these two if they are still available. Please PM me some info re: payment. I’ll pay for Priority Mail shipping too.

The more we just complain…the more things stay the same.