The engine is slowly slipping down in the water, it takes a few hours, then the prop will hold just under the water line. Any help as to what i am dealing with would be appreciated. What do i need to check, replace or fix? Thanks
It might be low on fluid.
I am no authority on the matter though!
More qualified members will answer shortly… I hope…
“Miss Amanda”
-KeyWest
-Bluewater 2020CC
-Yammy F-150God is GOOD!! ALL the time!!</font id=“blue”>
If the rod gland packing is not leaking, than the cylinder my be bypassing.
Make sure your manual release valve is tight and it could be the pilot valve inside the pump also.
Rick
When you tilt the motor up, do you hear a gurgling sound or is there hesitation? If so you have air in the resevoir and are low on fluid
Mike
“Seahawk” 204CC Angler, 150 Merc