Here’s the deal. I have two fully working/functional Yamaha 250 OX66s with 30” shafts with all gauges, controls, one set of props (your choice 19 or 23), and two parts motors- 25” shaft OX66s. I’ll even throw in what extra new steering cable I have.
The 30” motors are on the boat. They are coming off of the boat in the next week or so and will be put on pallets to ship or be picked up. I have the titles for these, but they have not been registered in South Carolina, if that matters to you. The compression was checked yesterday and was even across both motors and all cylinders within 3 psi. Average was 122-123. These are ready to go motors, with no known issues.
The 25” motors have titles and are registered in SC. Both lower’s are fully functional, and with the exception of a coil pack or two, fuel pump, and the power heads, are full motors. The power heads are both bad, and not really rebuildable. If someone wanted to swap the powerhead to the 25s, this would be a good set for that. Everything is there for either set, and a ton of other parts.
The 30s have somewhere around 400 hours on them total and are clean. The 25s had ~1300, and are pretty good, but not quite as clean on the top end as the 30s.
PM me for pics and video of the motors starting and running, and any questions
Everything for $8500 obo. Shipping is on you. Happy to load for you in your truck/trailer/shipper. Not splitting them up.
Branchville SC
803 378-0940