What do you guys do to give a finished look to the hole drill for the cable for your antenna?
2008 Sea Fox 197 CC
2008 Suzuki 140
Are you running the wire through the fiberglass? If you are they make a cable run that the wire runs through they come in stainless and plastic. If your close by I believe I have a black plastic one for you to have. I ran my wire through the T-top tubing.
Yes, I will be running it the fiberglass - No T-top… Might could run it through my grab rail? I’m work Moncks Corner and live in St. Stephen, but could meet you. Thanks.
2008 Sea Fox 197 CC
2008 Suzuki 140
If it’s through the fiber glass near your console or grab rail and the wire is exposed I have used a clam shell. I think it’s called a clam shell? It covers the small hole you drilled and the wire near the hole to have the finished look and keep the water out. I have a smaller clam shell if you need it. Hope this helps
Yeah, I think that is what I have been seeing, but did not know what it was called. PM sent…
2008 Sea Fox 197 CC
2008 Suzuki 140
SS clamshell. I have a handfull of them at the house. You are welcome to one if you need it. West Marine should have them though.
Threads I will not click on:
“How Did Michael Jackson Impact Your Life?”
I used the clamshell and then used silicone inside the clamshell and around the cable(s) to keep water out…
“Miss Amanda”
-KeyWest
-Bluewater 2020CC
-Yammy F-150God is GOOD!! ALL the time!!</font id=“blue”>
i agree clam shell
From reds to marlin you got it.
2001 210 Sea Fox
2009 Yamaha F150
2010 Skeeter ZX22T
2010 Yamaha VMAX 225
TEAM BOAT
I had no idea what they were called. I do have one if you want it.