wanted

General Boats and Motors
1

I would like to buy a used creek boat,crow boat, or caiman boat. I want a two man. Might consider one man. You may e-mail or call 584-6992.

2

what is a crow boat

I’m now at www.teamcharlestonmarine.com

3

There was a used 14’ jon boat with side console and a 20 hp honda on Craigslist today. 2006 I think. Sounded like a pretty good deal.

4

Black plastic-lookin one and two man boats from back in the day. I don’t know if any had the capacity for an outboard or not.

quote:
Originally posted by chris V

what is a crow boat

I’m now at www.teamcharlestonmarine.com

5

I have a boat I made. It is 11’6" long and 32" wide with a flare at the gunnel to about 36". I have a fresh water trolling motor and dept finder on it and an anchor windlas ( very small capacity). It is registered with numbers and is made with marine plywood and cyprus with glass cloth and epoxy resin at the seams. I’ll sell it for $500. Used less than a year, only in the water about 4 times. It has 10 inch sides. e-mail me at scottsmh@hotmail.com if you’re interested. I’ll send you a pic. I want to build another one.

6

quote:
chris V Posted - 03/04/2010 : 7:08:56 PM

what is a crow boat

I’m now at www.teamcharlestonmarine.com

</font id=“quote”></blockquote id=“quote”>

Crow boat is a small boat used for very narrow, very shallow water ways to get to a duck blind or fish very small bodies of water with. Usually cant put anything bigger than a trolling motor on it. The ones I have seen are one man but have also heard of two man.

quote:
scottsmh Posted - 03/06/2010 : 3:59:53 PM

I have a boat I made. It is 11’6" long and 32" wide with a flare at the gunnel to about 36". I have a fresh water trolling motor and dept finder on it and an anchor windlas ( very small capacity). It is registered with numbers and is made with marine plywood and cyprus with glass cloth and epoxy resin at the seams. I’ll sell it for $500. Used less than a year, only in the water about 4 times. It has 10 inch sides. e-mail me at scottsmh@hotmail.com if you’re interested. I’ll send you a pic. I want to build another one.

</font id=“quote”></blockquote id=“quote”>

That is a pretty good deal and at that length you could easy fit two people

Mike
Wellcraft 250, 225 OMC
17’ Hydrasports bass boat, 150 Evinrude
12’ jon, 24lb thrust MK
16’ canoe, oars

7

Not new but here is a link. At least gives you a brand name.

http://www.eagleplasticsonline.com/two-man-crow-boats.htm

8

I have a 14 foot J-boat w/ 35 HP merc and trailer, any help to you??

9

I’ve got a 13’ CMF hull with a 15 HP Johnson & trailer