Hey everyone, I have a 2014 Pioneer 197 SF that came with the analog Yamaha gauges. I have recently purchased the Yamaha Command Link Speedo and Tach gauges which have trim and fuel levels on them. I’m curious if someone can point me in the direction of what I need to install these or if someone has the know how on installation. Any advice is greatly appreciated. Thank you!
2014 Pioneer 197 Sportfish
2012 Malibu Stealth 12 Kayak
“If people concentrated on the really important things in life, there would be a shortage of fishing poles”
Me, I went in the other direction on my old scout…After having to replace a gauge once and then being faced with a second replacement, I thought it prudent to go analog.
you will need about $150 to $200 worth of other harnesses and parts.
you have to build a network from the motor for the gauges to plug into, so they can access the engine info.
its not like the regular gauges where everything is in the existing wiring harness.
if you still need it, we can help you with all the parts
From what I’m told, there is a process for calibrating the fuel level reading. And it involves filling the tank to specific levels, and setting the gage at each. I’ve not been through it and apparently my gage has not either. See recent post on my experience.
If this is for the Command Link plus or the new 6yc gauge, you can get pretty close setting it up with some inline resistors to fool the gauge into thinking it knows what is in the tank.
quote:Originally posted by Ona Mission
From what I’m told, there is a process for calibrating the fuel level reading. And it involves filling the tank to specific levels, and setting the gage at each. I’ve not been through it and apparently my gage has not either. See recent post on my experience.