As the price of gas keeps rising we all look for any way we can save on gas especially when we are heading out for a day of fishing. The following is an article we received from Boat U.S. on some tips you can use to help save on the fuel bill when trailering your boat to the landing.
Ten Fuel-Saving Tips for Towing the Boat to the Lake
ALEXANDRIA, Va., June 15, 2011 - With fuel prices high, trailering a boat has become more expensive. However, there are some easy ways to stretch that tank of gas with your tow vehicle. Here are ten tips from BoatUS:
Basic maintenance: Keep your tow vehicle’s engine tuned and replace the engine air filter on a periodic basis.
Drive ahead: Moderate your use of the accelerator pedal by “driving ahead” - by looking ahead and anticipating traffic, you will likely brake less aggressively and reaccelerate without having to be heavy on the fuel-hungry accelerator pedal. Take it easy when starting from a dead stop.
Stop “cruising”: With automatic transmissions, stay off the cruise control, especially when traveling in hills or mountains. Cruise control cannot anticipate going up or down a slope, and tends to use more fuel due when the transmission kicks down to a lower gear to compensate for speed loss on a hill.
Tire tip: Keep tires properly inflated to the recommended PSI on both the tow vehicle and trailer. Check PSI before every trip.
Cover up: On long trips, use a tight-fitting boat cover when towing, which helps decrease wind drag and improves fuel economy.
Lighten up: Lighten the load by carrying just what you need for the day or weekend in the tow vehicle and onboard your boat. Also, at about six pounds per gallon of gas, try to keep the boat’s fuel tank near empty when trailering long distances.
Drain it: Never leave water in a live well or bait tank. At a little over eight pounds per gallon, carrying an extra 25 gallons of water in these built-in tanks can represent 10% of the boat’s total weight